You must complete the Linksys RE7000 Setup in order to expand your Wi-Fi range. In order to do this, you must turn on the extender, navigate to the Linksys RE7000 Extender page, and enter both the basic and advanced settings.Once these settings are configured, your network coverage will be enhanced and expanded, reducing the presence of Wi-Fi dead zones.
How to reset Linksys RE7000 Extender?
You might need to restore your Linksys RE7000 Extender to factory default settings if it is not operating properly. To reset the Linksys RE7000 Extender, carry out the following steps:
- Connect the Linksys RE7000 Extender first.
- Find the reset button on your extender, which is often located next to a little hole on the gadget.
- Use a paperclip or other similar tool to push and hold the reset button for around ten seconds.
- Press and hold the button while observing the LED lights on the extender.While doing this, they might flash.
- After around 10 seconds, click the reset button to release it.
- Hold off till the extender restarts. This could take one or two minutes.
- The extender's factory default settings will have been reinstated after the reboot.
Please be aware that resetting your extender will remove all of your customised settings, forcing you to start the Linksys RE7000 Setup procedure over from scratch.
No comments yet