To extend your Wi-Fi range, the Linksys RE7000 setup needs to be finished. To do this, turn on the extender, open the web browser and go to the Linksys RE7000 Extender website, enter the default and advanced settings. After the linksys RE7000 extenders are complete, your network coverage will be enhanced and increased, reducing the occurrence of Wi-Fi dead zones.
Configuring the Linksys RE7000 Extender Using WPS
Using the WPS method is the simplest approach to expand your home network. For easy linksys RE7000 setup , follow these steps:
- Connect the Linksys RE7000 Extender to an electrical outlet, turn it on, and allow it some time to initialise.
- On your Linksys RE7000 Extender, find the WPS button, which is typically located on the front or side of the device.
- Press and hold the WPS button on the extender for approximately 2 seconds. This action will initiate the WPS setup process.
- You will see the WPS LED light on the extender start blinking. This indicates that the extender is attempting to establish a connection with your router.
- Once the WPS process is completed and a connection is successfully established, the LEDs on both the extender and the router will stabilise.
Congratulations! You have successfully set up your Linksys RE7000 setup network using the WPS method. If you require further assistance with your extender or have any other questions, don't hesitate to reach out to us for support.
No comments yet