Crazy pavers that are another name for irregular pavers provide a lovely rustic look for the outdoors areas. Crazy pavers they have irregular and different sizes which come out as if they are a puzzle. The process of laying these stones demands precision and steadiness, but with those values, the final look becomes attractive. This natural stone can give your patio, walkway, pool deck, or garden path the appearance of a natural ornamental area.
In this article we will examine the installation and repair procedures of crazy stones pavers which will guide you to design an amazing area and the ways to keep it this way for longer.
Installation Tricks of Crazy Pavers
- Preparation
You must dig the region where you intend to build a crazy paver. The excavation will be determined by the depth of the paving stones and the thickness of the supporting material. You are recommended to make a foundation layer of at least 4-6 inches.
- Add Base Material
Now, you dig out the space to the required depth and then add the base material. It is possible for you to use a wheelbarrow as a means of moving the gravel from the road base to the excavated area. Distribute the base material uniformly all over the zone by employing a shovel or a rake. Make sure the layer is 2-3 inches thick. Make certain that the controlled material is overlapping the edges of the excavation site in order to support the pavers.
- Lay the Pavers
Then position the major base pavers first, arranging them either in the circular or random manner, according to your taste. You better make sure that you fill in the spaces between the big pavry and the smaller ones fitting them together like a jigsaw puzzle. A rubber mallet can be used to tap the pavers into place and check that they are properly leveled and even with the others. Make sure you constantly purchase more units of paver to deal with the cases of wrong installation or breakage. You could always use a broken jar for instance for a plant border or get creative with that chunk.
- Cutting Pavers
Normally, you would use a chisel and hammer to cut pavers at curves or irregular shapes to fit. Another thing that needs to be thoroughly considered is wearing safety goggles and gloves whenever you are going to cut the pavers.
- Filling joints and gaps
After all pavers are in place, homeowners seal up joints to stabilize the surface and prevent any weeds from growing in between pavers. The most prevalent materials are sand, fine gravel, or polymeric sand. In case you pick sand or small pebbles joint paver, then you must make sure that you sweep or brush them. Make sure that all the joints are full and there is no coverage gaps or voids.
- Compact the Surface
Gently level the surface by a compactor, which prevents the pavers from floating. Once you are completed the procedure, do a visual inspection by walking on the surface to detect if there are any areas left uneven. Incorporate additional base stock and compaction measures to see if anything changes and to then carry on.
Maintenance Tips
- Regular Cleaning
There will be a need for constant cleaning to wash the pavers from dust and a pile of stuff. Brooming is the simplest way to keep crazy paving stones in good condition. Especially professions remind you to sweep off your crazy stone pavers after a rain. In the case when leaves fall onto the paved surface, make sure to clean them up soon because the pigment of the debris can stain your floor.
- Weed Control
As you lay pavers, weed control is one of the methods you can practice to stop the growth of weeds and to avoid any damage by instantly checking on them. Weed control is achievable if you cover the compressed soil with the weed barrier fabric before laying the pavers. Furthermore, you must get rid of weeds as they grow - to make sure they don't grow deeper or expand.
- Sealing
When the stones have been sealed, they appear like new ones. For them, the surface must stay clean and uncontaminated by external substances preventing them from getting deep down to the heart of the floor. The most efficient preventative method is to fill them in. Applying sealant to your stone will protect it and sparkling from oil, one of them that is found grease BBQ areas and driveways. A permeating sealer application is highly advised. Furthermore, the natural look of the stones could be preserved with the help of these sealers as they also make them slip-proof.
- Resealing
During maintenance crazy stone pavers require resealing every 4-5 years. Depending on the application and usage of the crazy stone floor paving installation, resealing might be required at shorter or longer intervals. As per the general rule, you need to reseal a driveway crazy paver after every 2-3 years, after every 4 years for a barbeque floor or an outdoor kitchen area.
- Reapply Joint Material
Throughout the years, the mortar, constituting the connection between pavers, could gradually disappear. Periodically, check the joints and fill in those spaces that need gravel or sand.
Also Read : Enhance Your Home with the Practical Advantages of Exterior Wall Cladding
Conclusion
These tips can help you attain a beautiful and strong surface using crazy stone pavers that can last a long time and bring added beauty and function to your outdoor area. This option certainly has its benefits compared to other stone types. You simply need to select from the wide range of options and pick the one that best fits your home. Feel free to ask our stone care professionals on the phone if you have a matter to clarify. We provide only premium quality stones from Stone Centre which will beautify the spaces and be long-lasting due to the state-of-the-art quality.
No comments yet