)
Linux Foundation CKS 최고품질 시험덤프 공부자료 응시자분들은 더이상 자기 홀로 시험자료를 정리할 필요가 없습니다, CKS덤프는 pdf버전과 온라인버전으로 되어있는데 pdf버전은 출력가능하고 온라인버전은 휴대폰에서도 사용가능합니다, CKS덤프로 공부하여 CKS시험에서 불합격받으시면 바로 덤프비용전액 환불처리 해드리는 서비스를 제공해드리기에 아무런 부담없는 CKS시험준비공부를 할수 있습니다, 학원공부나 다른 시험자료가 필요없이KoreaDumps의 Linux Foundation인증 CKS덤프만 공부하시면Linux Foundation인증 CKS시험을 패스하여 자격증을 취득할수 있습니다, KoreaDumps Linux Foundation CKS 덤프는Linux Foundation CKS실제시험 변화의 기반에서 스케줄에 따라 업데이트 합니다.
오늘 하루만 더 옆에 있어 주면 안 돼요, 하지만 대체로 한 가지 사조가 배심원석을 흐르고 있CKS완벽한 인증자료었다, 가격적인 면은 우리 상담실장님과 말씀해 보시죠, 내일 학교에서 봐요 서린이 인사를 하며 먼저 차에 올라탔다 오늘 만나서 반가웠습니다 현우가 세현한테도 인사를 건넸다 저도 반가웠어요.
거인족의 시체야, 정말 싫습니까, 전부 박살 난 채 불에 탔지만 얼CKS높은 통과율 인기 시험자료추 이전의 형태를 짐작할 수 있다, 그 인간은 입이 너무 가볍잖아, 빛나가 함박웃음을 터뜨렸다, 기대가 꼬부라진 목소리로 그렇게 말했다.
물어본 이상 무시할 수는 없잖아, 식이 자신을 가끔씩 생각이라도 하는지CKS최고품질 시험덤프 공부자료궁금하고 또 다른 여인이 생긴 게 아닐까 화가 나기도 했다, 과장님 닳겠다, 닳겠어, 히드라의 조직원인 당신을 그냥 내버려 둘 수는 없습니다.
그중 한국이 가장 새로운 경험을 안겨줬죠.다시 떠올리자니 황당한지 주혁은 입을CKS높은 통과율 시험대비 공부자료가리며 웃었다, 유니세프 역시 두 팔을 걷어붙였다, 언제 그 손모가지를 베어버릴지 알 수 없지만 말이야, 다시금 그 아찔했던 장면이 떠올라 가슴이 철렁하였다.
그때, 그림자가 성태의 뒤에서 드리웠다, 일단 돈부터 갚으면 들어줄게, https://www.koreadumps.com/CKS_exam-braindumps.html그렇게 의사가 사라지고 난 뒤에야, 유모가 내키지 않는다는 표정으로 입을 열었다, 그러자 애지는 히죽 웃으며 다율이 건네는 차를 받아 들었다.
현우는 그녀에게 있어 언제나 아픈 손가락이었다, 가슴이CKS최고품질 시험덤프 공부자료뜨거워질수록 머리는 차가워졌다, 조금이라도 더 느끼고 싶어 그녀의 정수리에 턱을 대고 느릿하게 문지르자 부드러운 갈색 머리가 턱 밑을 간질였다, 미라벨은 평소와 조금CKS최고품질 시험덤프 공부자료다른 그녀의 표정에 잠시 고개를 갸웃했지만, 곧이어 자신보다 키가 큰 이레나를 올려다보며 즐겁게 입을 열었다.
시험패스에 유효한 CKS 최고품질 시험덤프 공부자료 최신버전 덤프샘플문제 다운로드
상헌은 그런 노월을 보며 입가를 길CKS최고품질 시험덤프 공부자료게 늘였다, 네 부모님을 생각해서라도, 이 추악한 것이, 달리아!
Certified Kubernetes Security Specialist (CKS) 덤프 다운받기
NEW QUESTION 31
Cluster: admission-cluster
Master node: master
Worker node: worker1
You can switch the cluster/configuration context using the following command:
[desk@cli] $ kubectl config use-context admission-cluster
Context:
A container image scanner is set up on the cluster, but it's not yet fully integrated into the cluster's configuration. When complete, the container image scanner shall scan for and reject the use of vulnerable images.
Task:
You have to complete the entire task on the cluster's master node, where all services and files have been prepared and placed.
Given an incomplete configuration in directory /etc/Kubernetes/config and a functional container image scanner with HTTPS endpoint https://imagescanner.local:8181/image_policy:
1. Enable the necessary plugins to create an image policy
2. Validate the control configuration and change it to an implicit deny
3. Edit the configuration to point to the provided HTTPS endpoint correctly Finally, test if the configuration is working by trying to deploy the vulnerable resource /home/cert_masters/test-pod.yml Note: You can find the container image scanner's log file at /var/log/policy/scanner.log
Answer:
Explanation:
[master@cli] $ cd /etc/Kubernetes/config
1. Edit kubeconfig to explicity deny
[master@cli] $ vim kubeconfig.json
"defaultAllow": false # Change to false
2. fix server parameter by taking its value from ~/.kube/config
[master@cli] $cat /etc/kubernetes/config/kubeconfig.yaml | grep server
server:
3. Enable ImagePolicyWebhook
[master@cli] $ vim /etc/kubernetes/manifests/kube-apiserver.yaml
- --enable-admission-plugins=NodeRestriction,ImagePolicyWebhook # Add this
- --admission-control-config-file=/etc/kubernetes/config/kubeconfig.json # Add this Explanation
[desk@cli] $ ssh master
[master@cli] $ cd /etc/Kubernetes/config
[master@cli] $ vim kubeconfig.json
{
"imagePolicy": {
"kubeConfigFile": "/etc/kubernetes/config/kubeconfig.yaml",
"allowTTL": 50,
"denyTTL": 50,
"retryBackoff": 500,
"defaultAllow": true # Delete this
"defaultAllow": false # Add this
}
}
Note: We can see a missing value here, so how from where i can get this value
[master@cli] $cat ~/.kube/config | grep server
or
[master@cli] $cat /etc/kubernetes/manifests/kube-apiserver.yaml
[master@cli] $vim /etc/kubernetes/config/kubeconfig.yaml
[master@cli] $ vim /etc/kubernetes/manifests/kube-apiserver.yaml - --enable-admission-plugins=NodeRestriction # Delete This - --enable-admission-plugins=NodeRestriction,ImagePolicyWebhook # Add this - --admission-control-config-file=/etc/kubernetes/config/kubeconfig.json # Add this Reference: https://kubernetes.io/docs/reference/access-authn-authz/admission-controllers/
- --enable-admission-plugins=NodeRestriction # Delete This
- --enable-admission-plugins=NodeRestriction,ImagePolicyWebhook # Add this
- --admission-control-config-file=/etc/kubernetes/config/kubeconfig.json # Add this
[master@cli] $ vim /etc/kubernetes/manifests/kube-apiserver.yaml - --enable-admission-plugins=NodeRestriction # Delete This - --enable-admission-plugins=NodeRestriction,ImagePolicyWebhook # Add this - --admission-control-config-file=/etc/kubernetes/config/kubeconfig.json # Add this Reference: https://kubernetes.io/docs/reference/access-authn-authz/admission-controllers/
NEW QUESTION 32
SIMULATION
Enable audit logs in the cluster, To Do so, enable the log backend, and ensure that
1. logs are stored at /var/log/kubernetes-logs.txt.
2. Log files are retained for 12 days.
3. at maximum, a number of 8 old audit logs files are retained.
4. set the maximum size before getting rotated to 200MB
Edit and extend the basic policy to log:
1. namespaces changes at RequestResponse
2. Log the request body of secrets changes in the namespace kube-system.
3. Log all other resources in core and extensions at the Request level.
4. Log "pods/portforward", "services/proxy" at Metadata level.
5. Omit the Stage RequestReceived
All other requests at the Metadata level
Answer:
Explanation:
Kubernetes auditing provides a security-relevant chronological set of records about a cluster. Kube-apiserver performs auditing. Each request on each stage of its execution generates an event, which is then pre-processed according to a certain policy and written to a backend. The policy determines what's recorded and the backends persist the records.
You might want to configure the audit log as part of compliance with the CIS (Center for Internet Security) Kubernetes Benchmark controls.
The audit log can be enabled by default using the following configuration in cluster.yml:
services:
kube-api:
audit_log:
enabled: true
When the audit log is enabled, you should be able to see the default values at /etc/kubernetes/audit-policy.yaml The log backend writes audit events to a file in JSONlines format. You can configure the log audit backend using the following kube-apiserver flags:
--audit-log-path specifies the log file path that log backend uses to write audit events. Not specifying this flag disables log backend. - means standard out
--audit-log-maxage defined the maximum number of days to retain old audit log files
--audit-log-maxbackup defines the maximum number of audit log files to retain
--audit-log-maxsize defines the maximum size in megabytes of the audit log file before it gets rotated If your cluster's control plane runs the kube-apiserver as a Pod, remember to mount the hostPath to the location of the policy file and log file, so that audit records are persisted. For example:
--audit-policy-file=/etc/kubernetes/audit-policy.yaml \
--audit-log-path=/var/log/audit.log
NEW QUESTION 33
On the Cluster worker node, enforce the prepared AppArmor profile
#include <tunables/global>
profile docker-nginx flags=(attach_disconnected,mediate_deleted) {
#include <abstractions/base>
network inet tcp,
network inet udp,
network inet icmp,
deny network raw,
deny network packet,
file,
umount,
deny /bin/** wl,
deny /boot/** wl,
deny /dev/** wl,
deny /etc/** wl,
deny /home/** wl,
deny /lib/** wl,
deny /lib64/** wl,
deny /media/** wl,
deny /mnt/** wl,
deny /opt/** wl,
deny /proc/** wl,
deny /root/** wl,
deny /sbin/** wl,
deny /srv/** wl,
deny /tmp/** wl,
deny /sys/** wl,
deny /usr/** wl,
audit /** w,
/var/run/nginx.pid w,
/usr/sbin/nginx ix,
deny /bin/dash mrwklx,
deny /bin/sh mrwklx,
deny /usr/bin/top mrwklx,
capability chown,
capability dac_override,
capability setuid,
capability setgid,
capability net_bind_service,
deny @{PROC}/* w, # deny write for all files directly in /proc (not in a subdir)
# deny write to files not in /proc/<number>/** or /proc/sys/**
deny @{PROC}/{[^1-9],[^1-9][^0-9],[^1-9s][^0-9y][^0-9s],[^1-9][^0-9][^0-9][^0-9]*}/** w, deny @{PROC}/sys/[^k]** w, # deny /proc/sys except /proc/sys/k* (effectively /proc/sys/kernel) deny @{PROC}/sys/kernel/{?,??,[^s][^h][^m]**} w, # deny everything except shm* in /proc/sys/kernel/ deny @{PROC}/sysrq-trigger rwklx, deny @{PROC}/mem rwklx, deny @{PROC}/kmem rwklx, deny @{PROC}/kcore rwklx, deny mount, deny /sys/[^f]*/** wklx, deny /sys/f[^s]*/** wklx, deny /sys/fs/[^c]*/** wklx, deny /sys/fs/c[^g]*/** wklx, deny /sys/fs/cg[^r]*/** wklx, deny /sys/firmware/** rwklx, deny /sys/kernel/security/** rwklx,
}
Edit the prepared manifest file to include the AppArmor profile.
apiVersion: v1
kind: Pod
metadata:
name: apparmor-pod
spec:
containers:
- name: apparmor-pod
image: nginx
Finally, apply the manifests files and create the Pod specified on it.
Verify: Try to use command ping, top, sh
- A. Send us your Feedback on this.
Answer: A
NEW QUESTION 34
......
No comments yet