SMD screens are revolutionizing the way we communicate and advertise multipurpose spaces, sports halls, and commercial facilities due to their capacity to display information as well as their many possibilities as a communications and marketing instrument. What are the essential concepts to consider when choosing an SMD screen?
Every project has unique requirements. Therefore eight factors must be addressed, including the dimensions of the screens, the best resolution in relation to distances, and what information will be projected, among other things. Mondo offers a wide range of outdoor and indoor SMD screens, as well as a full service for custom-designed projects.
What aspects must be addressed before choosing an SMD screen?
SMD: A semiconductor device that emits two types of light.
What is the main distinction between them?
SMD SMD is smaller in size than the Analog through the hole.
Composition:
A pixel based on through-hole lads is typically made up of three boys (1 red, one green, and one blue, though different topologies may be used, for example, 2 red, one green, and one blue, and thus being complemented with 4 SMDs ). A pixel based on SMD SMDs typically employs 3 in 1 SMD technology. This has three SMDs in the same package.
Distance between pixels: Because of its reduced physical dimensions and the ability to incorporate numerous diodes into a single chip, SMD technology enables smaller screen construction pitches (pixel separation) than other technologies.
Sharpness:
Because the space between pixels is nearly consistent regardless of the color displayed, 3-in-1 SMD technology allows you to make panels with greater clarity. This is why, as compared to traditional panels of identical quality, the maximum visible distance of screens utilizing this technology improves by 25%.
Pixels:
They are the smallest, most uniform unit of color in a digital image. When using full-color SMD screens, each Pixel is made up of no more than three SMDs.
Resolution:
The definition of screen size in units of pixels.
Pitch is defined as the spacing between pixels. It is usually measured in millimeters.
Surface graphics:
The exterior of the SMD screen is intended to show material. It excludes structural elements such as frames, baseboards, and trims.
System of control:
The SMD screen is controlled by electronic equipment. The least distance from which the SMD screen may be adequately observed is the minimum view distance. In general, it is comparable to pitch but is given in meters. For example, the screen's minimum distance with a pitch of 10 mm is 10 meters.
The greatest possible viewing distance This is the furthest distance over which the SMD screen can be seen. It is based on the graphic surface of the screen. The display.
Viewing position:
The highest angle from the viewer's perspective is at which a user can see the content delivered by the monitor. Angles in both the horizontal and vertical planes must be taken into account.
No comments yet