Replacing Common Washing Machine Parts: What You Need to Know

Replacing Common Washing Machine Parts: What You Need to Know
5 min read

Washing machines are an inseparable part of our lives. In our busy schedule, they save us from the burden of heavy laundry. But what if one fine day your washing machine itself breaks down? While it is always recommended to call a washing machine repair service near me, in such a case, you can also address some minor issues at your end, without the help of a professional. You can find the detailed steps to replace the various parts of your washing machine on the internet. We are here to guide you about the major considerations to keep in mind while replacing the common washing machine parts.

Required Supplies

  •         Bearings
  •         Bearing grease
  •         Shock absorbers
  •         Belt
  •         Different colored LED tapes 5 mm
  •         Different colored LEDs 3/5 mm
  •         Resistors
  •         Pulse transformer
  •         Wire, connectors
  •         Plastic nylon straps (screeds)
  •         Thermotubes
  •         Silicone sealant 
  •         Rust removal lubricant 
  •         Citric acid
  •         Hammer
  •         Socket wrenches
  •         Hot glue gun & glue
  •         Soldering gun & solder
  •         Multimeter
  •         Clamp meter
  •         Screwdrivers, pliers, cutting pliers, and other tools can be found in any home workshop.

Tips to Follow

Disconnect the Washing Machine

Before starting any kind of repair make sure you properly disconnect the washing machine. Start by disconnecting the washing machine from the water supply and the mains. Then disconnect the hose that is attached at the back.

Check the Filter

Make sure you take care of small issues while troubleshooting the problem. The condition of the filter is one such issue. Carefully remove the filter and check its condition. If it is dirty, it can be put aside for descaling. You can simplify the task, by simply replacing it with another new filter. 

Take Pictures and Mark the Components

In order not to confuse wires with connectors during reassembly, you can simply photograph them. You can also choose to mark the components with a marker. A combination of both techniques can also be utilized. 

Tips to Remove the Motor

  •         Before disconnecting the motor, you need to remove the belt as well as all electrical wires (connectors).
  •         Secondly, you need to unscrew the shock absorbers using a socket wrench. The tank is now ready to be pulled out along with the drum.
  •         Before disassembling the washing machine tank, you first need to separate the motor from its body.
  •         In order to remove the pulley smoothly, first block it. This can be done using a regular wrench. 
  •         The nut is unscrewed counterclockwise.

Disassembly of the Tank

  •         In order to separate the parts of a tank, you need to remove the metal fasteners.
  •         There is a rubber gasket between the two halves of the tank. It is better to replace it with a new one after reassembling the tank.
  •         Use a hammer to pull out the stainless steel drum, and a metal pipe to fit the axle diameter.
  •         It is better to use a special press to remove the drum.

Bearing Replacement

  •         The first and foremost thing required for bearing replacement is to buy the right bearing.
  •         This can be accurately done by checking for the designation codes on old bearings. 
  •         Also, make sure to replace the seal along with the bearing. These are provided with a pair of new bearings.
  •         Purchase the special water-repellent white grease. Lubricate the steel axle of the drum with grease in order to prevent it from rusting in the future. 
  •         You can now insert the drum into the bearings of the tub of the washing machine.

Hire a Washing Machine Repair Service Now

Thus, the blog presents a wholesome discussion about the things to keep in mind while replacing some of the important parts of the washing machine by yourself. However, if you find the task challenging, contact a washing machine repair professional. So, be mindful the next time your washing machine breaks down. Also, be sure you choose the right service provider to ensure the optimal performance and longevity of your devices. Serve Bharat is one such washing machine repair service provider in Jaipur that works on the principle of customer satisfaction. So, get rid of all your washing machine issues by contacting the best services for washing machine repair at Serve Bharat now. 

In case you have found a mistake in the text, please send a message to the author by selecting the mistake and pressing Ctrl-Enter.
serve bharat 2
Joined: 8 months ago
Comments (0)

    No comments yet

You must be logged in to comment.

Sign In