Quick And Easy Ways to Clean Microfiber Upholstery at Home

5 min read

If you’ve ever had to clean microfiber upholstery, then you know it can be a pain. Not only is it tough to get the dirt and dust off, but the fabric is also delicate and prone to tearing. Here are some quick and easy ways to clean microfiber upholstery at home: 1. Use a vacuum cleaner with a crevice tool. This will help get into tight spaces and retrieve all the dirt and dust. 2. Use a damp cloth and mild soap. Rub the cloth into the fabric until it’s wet, then use a soft brush to scrub. Rinse the cloth off and repeat if necessary. 3. Use a spray cleaner in a gentle setting. Mist the cleaner onto the fabric, then work in small circles until the entire surface is covered. Let the fabric air dry before using the furniture again.

Preparing for Your Upholstery

If you have microfiber upholstery, preparing it for cleaning can be a bit of a hassle. Here are four quick and easy ways to clean microfiber furniture at home:

  1. Use wet wipes or a damp cloth to clean the surface.
  2. Pour hydrogen peroxide or another type of cleaner onto a cloth and wipe the surface.
  3. Pour white vinegar onto a cloth and wipe the surface.
  4. Use dawn soap on a cloth to clean the surface.

Also Read: DIY Vs. Professional Upholstery Cleaning Service: Which Is Better

 

Washing Upholstery

If your microfiber upholstery is looking a little grubby, there are several quick and easy ways to clean it at home. Start by spraying a light bleach solution on the stain, followed by a thorough soapy water rinse. If the cloth is very dirty, you can also try using a carpet cleaner with a high-pressure hose. Just be sure to wear protective gear, such as goggles and gloves.

Drying Upholstery

There are many ways to clean microfiber upholstery at home. Here are a few quick and easy methods:

- Wet down the area to be cleaned with cool water. Add a bit of laundry soap if desired. Swish around the area to be cleaned and then scrub with a stiff brush. Be sure to remove all the dirt, dust, and pet hair. Rinse off the area with cool water.

- If spot cleaning is necessary, first wet down the area to be cleaned with cool water. Add a bit of laundry soap if desired. Swish around the area to be cleaned and then scrub with a stiff brush. Be sure to remove all the dirt, dust, and pet hair. Pour rubbing alcohol onto a cloth and using circular motions rub alcohol into the fabric until it is saturated. Wipe away any excess alcohol using another cloth or paper towel. Repeat as necessary until all areas are clean.

Protecting Your Upholstery from Dirt and Dust

There’s no need to spend a fortune on professional carpet cleaning when you can clean your microfiber furniture at home with simple solutions. Here are four easy methods for keeping your upholstery looking and smelling fresh:

  1. Use a standard household cleaner. Work the cleaner into the fabric with a brush, then let it sit for a few minutes before rinsing off.
  2. Add a teaspoon of baking soda to a quart of water, and pour the solution over the furniture. Let it sit for 10 minutes, then rinse it off with fresh water. Baking soda will help Remove grease and stains from fabrics.
  3. Fill a spray bottle with white vinegar and spritz it over the furniture. Let it soak for 10 minutes, then rinse it off with fresh water. Vinegar is a natural antimicrobial agent, so it will fight bacteria and odors in the upholstery.
  4. Try an air purifier set to high or use an electronic vacuum cleaner to clean delicate fabrics without risking damage.

Conclusion

If you're like most people, you probably don't have the time or inclination to clean your microfiber upholstery very often - even if it looks really good and feels great when it's clean. Fortunately, there are a few quick and easy ways to make sure your furniture stays looking great without having to spend hours on end cleaning it. If you want to contact professional Upholstery Cleaning in Brisbane, then you can also call them.

In case you have found a mistake in the text, please send a message to the author by selecting the mistake and pressing Ctrl-Enter.
Comments (0)

    No comments yet

You must be logged in to comment.

Sign In