Netgear Nighthawk WiFi range extenders have grabbed many eyeballs nowadays. They are known to provide continuous WiFi range to its users in every corner of their house. But, 99 percent of users across the globe have reported that after performing Netgear Nighthawk setup, they are continuously seeing red light on the extender. On the off chance, you are also amongst those users who are facing red light issue with their Nighthawk WiFi range extender, then this troubleshooting post will really prove a big help to you. Here, we have provided some common reasons first that have led you to experience the issue along with the troubleshooting tips to fix the problem in discussion with ease.
Let’s dig a little deeper!
Reasons: Netgear Nighthawk Extender Red Light
Given below are the reasons that might be causing the red light issue. So, before you apply fixes to troubleshoot the issue, consider the reasons behind it first. Hence, keeping the reasons into consideration will help you troubleshoot the red light problem you are facing right from the comfort of your home.
-
Excessive distance between your router and the Nighthawk extender
-
No connection between the extender and your router
-
Bad Nighthawk extender’s placement
-
Technical glitches also lead to the red light issue
-
Improper setup
-
Outdated Nighthawk extender’s firmware version
In accordance with the reasons listed above, we really hope that troubleshooting the problem will now become a walk in the park for you. Hence, head towards the upcoming section. Over there we have provided relevant fixes for troubleshooting the problem in an instant. Keep reading and don’t scroll away.
Fixed: Netgear Nighthawk Extender Red Light
Reboot Your Nighthawk Extender
For fixing the red light error, the very first fix that you can try is to reboot or power cycle your WiFi range extender. To execute the process, implement the instructions highlighted below:
-
Firstly, turn off your WiFi range extender.
-
Wait for 6-7 minutes.
-
Turn on your WiFi range extender again.
-
Wait for the LEDs on the extender to stabilize.
Are you still seeing red light on your WiFi range extender? If yes, then try the other fix in line.
Make a Connection between Your Router & Extender
No connection between your WiFi range extender and router also causes the red light issue. Hence, making a stable connection between them is recommended. How? Just grab an Ethernet cable and insert its one end into your extender and other end into your WiFi router.
What if I don’t want to wire my devices?
No problem! A number of users don’t want to make a wired/ Ethernet connection between them and you are not an exception. In such a case, we recommend the users to connect their devices in a wireless manner.
Place Your Devices Closer
If you want to connect the devices wirelessly, then you must place them within reach of each other. And, also a stable internet connection is required for making a successful wireless connection between your range extender and router.
Change the Extender’s Location
Are you still seeing a red light on your WiFi extender? If yes, then it could be due to its bad placement. So, you need to change the extender’s placement right away.
Where to place the extender?
Your extender must be kept in an open location. Never place it inside your closet, show window, or under your computer table. No matter where you place your WiFi extender, it must not be placed away from your router. If possible, change the location of your router as well.
Perform Netgear Nighthawk Setup Properly
If you haven’t done the Netgear Nighthawk setup process in a proper way, then also you will see the red light on the extender. So, you need to reset the extender first and then configure it from scratch.
Update Nighthawk Extender Firmware
Last, but not least, the red light issue may persist if the firmware version on the extender has become outdated. Hence, perform Nighthawk extender firmware update process via the Nighthawk app.
On the off chance, you get Nighthawk app not working, then don’t worry. You simply need to ensure that your client device (in which you are running the app) is connected to your extender’s WiFi and it (the app) is up-to-date.
Endnote
We anticipate that the troubleshooting tips we have provided here will help you fix Netgear Nighthawk extender red light issue.
No comments yet