Linksys Velop AC1300 Setup

Utilise the Linksys Velop AC1300 Setup to strengthen your network's wireless signal. Whether you're experiencing trouble with dead zones or you just want to expand your coverage, the AC1300 can help. In this lesson, the setup procedure will be taken you through step-by-step.

How to configure Linksys Velop AC1300 using Manual method

To manually configure a Linksys Velop AC1300 Extender as well as that is web browser setup follow this instruction are manually method these are:-

• Firstly Plug in your Linksys Extender  and wait for the light of solid green in extender
• Get a device that supports wifi like a smartphone or laptop etc.
• Choose any web browser like chrome and type in web address bar Extender.linksys .com or 192.168.1.1
• Log in with default credentials (“admin” for both username and password).
• Set SSID, password, and security in “Wi-Fi Settings
•  After that you will follow the instructions that will be given
• Choose your current wifi network and if required input or password and select the next option and after this instruction setting procedure is completed
• After that, you will move the extender which was placed there are internet was weak
• You completed this manually method and your wifi service for better.

Now this setup is finished, now we can easily get internet at home and office by manually method

Linksys Velop AC1300 Setup via WPS method?

Your current WiFi network's performance and coverage will both be greatly improved with the Linksys velop AC1300 WiFi Range Extender. With the Linksys Velop AC1300 Setup and the extender's WPS (Wi-Fi Protected Setup) settings, connecting to a reliable and secure network is also quick and simple. 

• Firstly We have to have two devices router or extender which must have a WPS button
• First of all you plug the extender in electric outlet and nearby the router
• Wait wait for the Linksys velop Ac1300 power LED to turn green 
• You press the wps button in extender After  few minutes this same process you press the same button in router
• The connection is successful because the WPS LED on the extender turns solid green.

Linksys velop AC1300 Setup common problems

A Linksys AC1300 Wi-Fi range extender's installation can occasionally be difficult because of numerous aspects including placement, setup, and compatibility. Here are some typical issues that users could run into during Linksys Velop AC1300 setup and their fixes:

• Internet connection, but it is not working.
• Extender.Linksys.com not working
• Can’t connect to Linksys.Extender.com local
• Incorrect Extender.linksys.com password.
• Utilise your account details for logging in.
• Can’t access  linksys.extender.com
• Issues while accessing the 192.168.1.1 IP address.
• WiFi connectivity issues.
• Netgear Genie smart setup page continues to appear even after the Linksys AC1300 Setup.

• Forgot the Linksys Extender default password?
• The extender’s LED lights are not stable.
• Extender.Linksys.com doesn’t open.
• I can’t log in to the Linksys AC1300 extender.
• AC1300 drops internet connectivity.
• I can’t access Extender Linksys.com after the update on AC1300 Unable to update firmware.
• AC1300 is not working after a failed update.
• No internet connection is present on the WiFi extender.

Troubleshooting Steps: 

If you encounter issues regarding Linksys velop AC1300 setup,consider these troubleshooting:

• Check to see if the wall socket is providing sufficient power for the Linksys velop AC1300 Extender.
• Ensure that the electrical outlet to which the extender is linked is working properly and is not experiencing a short circuit.
• Access verifies that your device has a strong internet connection.
• Verify all wiring connections. Any cables that are broken should not be used.
• Make sure you've typed the right URL in the address box if you're experiencing issues with Extender.linksys.com
• Try setting up your Linksys extender again after doing a power cycle.
• When logging onto extender.linksys.com, only use the most recent version of the web browser.
• Update the firmware on your extender to the most recent version Linksys offers.
• Reset the extender to its original factory settings.

Updating Linksys Velop AC1300 Firmware

Updating the firmware is a special benefit if your extender will be upgraded and they work easily so fast etc so i do start firmware update follow this step

• Your device should be connected to the Linksys Velop network
• After that, open a web browser and put the web address(Extender.linksys.com) or IP address(192.168.1.1) and log in with default credentials or your custom ones.
• Find the update firmware  in setting or administration you follow this instruction in your on screen 
• You check on updates after that you find the firmware update their you click the firmware update and after few minutes router  is automatic reboot device 
• Your router is reboot automatic so you don't power off and disconnect
• Back in to the dashboard and check the new latest version are be done 

Linksys Velop AC1300 Reset Process

You can reset your Linksys Velop AC1300 system to return it to the factory default settings. Here is a step-by-step tutorial for resetting the Linksys Velop AC1300:

• Firstly you find the reset button in your device
• sometime your reset button is always side panel in your device this side button is small hole you found the reset button means hole that you pin up your paper clip and continue pin up  to 10 to 15 second 
• after that your device side light blink 
• after few minutes  your device is automatic power off and your reset process is complete  

 This step to carefully to reset your Linksys Velop AC1300 system

If you have problem with your Setup ,you can contact our professional expert or dial our Toll free number (+1-323-471-3045) or email: [email protected]