How Solar Panel Installation Works

How Solar Panel Installation Works
3 min read

If you're thinking of going solar, it's essential to do your research. It's a major investment, and you want to make sure the system is installed properly so it can deliver years of reliable energy. Fortunately, there are many resources available to help you make the best decision for your home and energy needs.

This article will help you to understand How solar panel installation process works, so you can be more informed about what your solar company is doing to ensure the quality of the job they're performing for you. Having this understanding will also help you determine what you can do to help the installation go smoothly.

One of the first steps in solar panel installation is to get the necessary permits from your local government. This can be a lengthy process and it's important to allow plenty of time for this step. Once the permit has been issued, your solar company can begin physical work on your house.

Once the roof is prepped, your installer will fix the anchors that will hold the solar panels. These are steel or aluminium hooks that poke through your roof tiles and secure to the rafters in the loft. The installer will carefully place these anchors to avoid any damage to your roof.

Next, the installation team will construct the frame for the solar panels. This can be a simple or elaborate design, depending on your preferences. Regardless of the style, it's important that the frame is strong and sturdy so the solar panels won't fall off during a storm. The installers will carefully map out where the panels are going to be, using sidewalk chalk and a level to ensure that they're all straight and evenly spaced.

When the frame is complete, the installers will install the solar panels. They'll start with the lower row and then move up, making sure to leave a gap in between each row. Once the lower rows are secured, the installers will work on the upper row, tightening each panel and securing it with clamps.

The final step in solar panel installation is to connect all the wires between the panels and the inverter. Smaller systems will use a single series of wires, while larger ones may use several parallel wires. The inverter will then route the electricity to a junction box, PV disconnect switch, and finally to your home's circuit breaker box.

After the installation is complete, your installer will test the system to ensure everything is working correctly. They'll run a voltmeter on your house to check the voltage of the system, then they'll connect it to the grid. If you opted for a battery, your installer will also connect that to the inverter at this point.

Once the connection to the grid is complete, your solar panels will begin producing energy for your home! You can use this power to reduce your utility bills or even sell it back to the electric company. Just remember that it's crucial to take advantage of incentives before making the jump to solar power. These vary by region, so be sure to check with your local solar companies for details.

energy platform 2
Energy Platform provides unbiased and transparent information to Australian renewable market investors. We process thousands of data and act as a single point k...
In case you have found a mistake in the text, please send a message to the author by selecting the mistake and pressing Ctrl-Enter.
Comments (0)

    No comments yet

You must be logged in to comment.

Sign In / Sign Up