A sparkling pool is the focal point of any backyard sanctuary, providing calmness, leisure activities, and refreshment to Spring Hill, FL, homeowners. As time passes, it's natural to have wear and tear that can damage the pool surface, resulting in holes, marks, and degeneration.
Therefore, here comes pool resurfacing for the rescue. It is a comprehensive solution that addresses not just cosmetic imperfections but also structural concerns. This process ensures that your pool regains its former glory & surpasses it.
In this article, we will explore the right time to have your pool resurfacing in spring hill FL along with the process for your better understanding.
When You Should Get Your Pool Resurfaced?
Every pool is unique, with many tales around it. But if ignored, the uniqueness slowly tarnishes to destroy the inner and outer layers of it rapidly. For instance, if you notice small cracks, peeling, or rough patches on the pool's surface, these could be potential warning indicators. It may not be mandatory, but it will help you out!
Here are some of the indicators which you must not ignore when it comes to your pool:
- Keep an eye out for any blemishes on the pool's surface. Indeed, such marks can be effectively removed. However, they shouldn't frequently be occurring.
- Discolouration can develop anywhere on the pool's surface. It is worth noting that while stains are typically easy to remove, discolouration is more lasting.
- If leaching or peeling has started to appear on or around the pool's surface, it does require your attention.
- Pebble loss as time passes, as well as any other surface-related concerns.
- Keep an eye out for degradation to the pool's exterior paint or fiberglass.
What Is The Process Of Pool Resurfacing In Spring Hill, FL?
The process of resurfacing a pool can vary depending on the contractor and the specific circumstances, but there are some general steps that are typically followed. Understanding these steps can help you better manage your expectations and feel more prepared for the process.
Let's take a closer look at what you can expect when you decide to resurface your pool.
- Drainage Check
The procedure of resurfacing a pool usually starts with proper drainage. Based on where you reside, there may be specific areas wherein you can empty your pool. But you will need to seek licenses from the municipality's government until the procedure can be finished.
- Surfaces Cleaning
Before proceeding, you must first ensure that the pool's surface is aptly prepared. You will most likely have to deal with debris in your pool, such as leaves and dirt. You can find rust stains or other minor discolourations that need to be cleaned. During this time, any small fractures can also be repaired, and any required mending can be completed.
- Priming
Usually, an initial epoxy is applied first, followed by the proper refinishing solution. It's like the procedure of priming a wall in your residence before painting it.
The primer is sprayed on the whole surface of the pool and allowed to dry according to the manufacturer's instructions before proceeding with the rest of the process. Mostly, it is 4 hours but may vary depending on the size of the surface.
- Finishing Up and Beyond
At this stage, a professional can apply the desired resurfacing solution to the pool. They'll start at the deep end of the pool and make their way to the shallow end. They will apply multiple coats, allowing each to dry before moving on to the next. It is crucial to ensure that each layer adheres properly. In most cases, they have three to four coats, although more may be required depending on the circumstances.
Filling up the Pool
Finally, after the final coat of resurfacing material has been placed and has dried, it is time to refill the pool. Most products used during this process recommend that the pool be left to dry in the open air for at least seven days. However, once you refill the pool and see the new beauty it brings, you'll realize that the effort was well worth it.
Conclusion
While resurfacing a pool is something you can do on your own, it is not always suggested. It is not only time-consuming but also labor-intensive. Additionally, picking the appropriate surface materials can be a challenge, and numerous things can go wrong.
By hiring Pools Pros of Pasco, you can benefit from their years of experience and ensure that your pool is resurfaced professionally, minimizing potential drawbacks and maximizing the lifespan of your pool's new surface. Connect with us if you are interested in pool resurfacing in Spring Hill, FL!
No comments yet