Diamond saw blades are a must-have item in any handyman's toolbox. These cutting tools come in handy for a variety of jobs. So, they are valuable items that a contractor would invest in. Unfortunately, some users wear out a diamond saw blade before it has reached its natural life span, due to a lack of knowledge about it. Users are often advised on how to select and use these tools. But they don't know how many of the suggestions are true.
So, here are the most common misconceptions about 10 diamond saw blades that you should not believe.
A Long Life Of A Blade Requires Bigger or Taller Segment Heights
This is a completely wrong statement. The life of a diamond saw blade is determined by several factors, such as the amount of diamond concentration, the mesh size, how much coolant is used, the operating speed, the depth and length of the cut, and so on. If the latter has less number of diamonds, the blade with a shorter segment height can survive with twice the height. Metal plays no role in the survival of saw blades. Everything is in the diamonds. Various aspects affect the blade's life but the segment is not one of them.
Cut-All Diamond Blades Are Best For Cutting Through Any Material
Diamond blades are designed for specific jobs. Some are designed to cut through softer, more abrasive materials. But some others are made to cut through harder materials. If you are using a blade for a task that it was not designed for, it can have adverse effects. You may save money by using the blades properly. Just understand what various blades can achieve. Then, you are well set, and you will also save a lot of money.
One Diamond Saw Blade Is the Same As Others
There are various diamond-saw blades on the market, in style, quality and cutting. Each 4 diamond saw blade has a different mesh size, chip size for crystals, and the number of diamonds. One blade cannot be used for all types of cutting jobs. Diamond blades are complicated tools. Each blade involves a ton of science. These are an investment, so you should use them wisely to get perfect results.
Here are a few facts about saw blades that you should know:
- 10 Diamond saw blade is available in different types: Circular, Gangsaw, and Band Saw
- Diamond saw blades are made using various methods: electroplating, vacuum brazing, and sintering.
- Diamonds are embedded into the metal coating during electroplating.
- Vacuum brazing helps weld diamond particles onto the outside of the blade.
- Sintering involves the use of metal-bonded diamonds.
- Diamond blades are used for grinding and not for cutting.
- Diamond saw blades can be used in both wet and dry weather.
The Summary
Now that you have read all the information provided in this blog post, you should have a better understanding of the myths and facts about diamond saw blades. Know your diamond saw blade from the inside out and try not to make the same mistakes again.
No comments yet