Best practices for use and maintenance of examination Lamps
An examination lamp, also called medical/ surgical lamps are essential items used for various procedures in healthcare settings. These lights are believed to be imperative for providing optimal brightness in the examination region as they reduce both operational and medical errors ensuring a much higher precision during various medical procedures. The importance of allowing patient care personnel to be more efficient and effective is undeniable, but uplift columns are only as helpful when they work well. Below mentioned are some of the best practices in using and taking care of your examination lamps.
Proper Way of Cleaning and Disinfect Your Examination Lamps
As much as cleanliness and disinfection of the examination lamps are concerned, these greatly influence their functionality in addition to stopping microbe infections from transferring among patients. Routine cleaning and disinfection are especially important, particularly when the lamps have been exposed to blood or other fluids from the body. This thorough post outlines steps for cleaning and disinfecting your negatoscope examination lamps to safely use between patients.
Start by shutting off the lamp and also unplugging it. Let it cool down first before cleaning.
Remove any dirt or dust from the lamp surface with a clean cloth, vacuum cleaner (hose) or compressed air.
Wipe the surface of your lamp with a disinfecting wipe or simply use a cloth dipped in an EPA-approved solution. Make sure the cloth or wipe is a bit moist but not that too much wet, it may cause damage to some components of lamp.
Clean the surface of the lamp by either, wiping it in a back and forth rubbing motion or circular method from top to bottom
Focus on the corners and edges of the lamp so they are cleaned properly.
Once you have finished cleaning it, let the lamp dry completely before you plug in and use.
Tips for Maintenance from the Pros
Performing routine maintenance of your examination lamps is an incredible way to ensure long life and performance. Following are few of the expert tips which even you can use at home to take good care or maintain your lamps.
Continually inspect your examination lights for any sorts of abrasion like cracks and deformities. Immediately repair damages with help from an experienced technician to avoid any further degradation or risks.
Always wipe off dust and dirt from your lamps with a suitable, soft cloth; Compressed air may also be used to clean larger particles.
Every 6 months, use a silicon surgical loupes based lubricant and apply to the flexible arm/joints of your lamps for smooth movement.
Replace bulbs on time, particularly in the high-frequency locations. Think about the bulb type as well, because some of them create more heat than others and can therefore burn out sooner resulting in a replacement.
When lamps are not in use, it is best to turn them off and unplug them correctly storing the lamp covered with a sheath so that they do not attract dust.
Tips: How To Use Your Lamps Best
Proper utilization of examination lamps is essential to achieve the desired level of illumination during procedures, and it also helps extend the life span of a lamp's parts. How to Use Your Grow LightsThe following are some tips & tricks on using your lamps properly :
Position the lamp properly during procedures by pointing the head of the lamp to where you want light and adjust arm angle.
Touching hot bulbs can lead to burns and damage which will speed up burnout.
Be careful when handling lamp, do not hit it against anything or expose to high temperatures and moisture.
Spend time downleveling shades should you precedently pull the puzzle mission, or think of purchasing lamps which are emanating at diverse brightness heights feeling in a method.
A Comprehensive Guide
The examination light comes in different shapes, sizes and design as per a requirement. But essential standard features and components are necessary for purchasing an examination lamp as well. Click here for a comprehensive guide to help you choose the best examination lamp of your choice.
Bulb Type: The type of bulb chosen seems to be equally important as it affects the quality and intensity of illumination. Coose LED lamps for their energy cost savings, lower radiant heat and longer life compared to halogen.
Dimension: Choose a size that suits the space in your factory where you will use this lamp to ensure sufficient area illumination.
Adjustment: Choose a portable exam lamp that has an adjustable arm and neck to allow you to direct light right where it's needed during your procedures.
Local or Wall Mount: Considerable regional places readily available featuring clamp as well as wall brace, evaluating the advantages and disadvantages of each.
Common Issue Quick Fixes
It is often the case that examination lamps break down, they may not work well and need repair or replacements. The general problems experienced with an examination surgical lights lamp are easy to fix, below is a list of few regular complaints people have about their examination lamps:
Then check that the light flickers (or doesn't) as well as turns on/off.
If the lamp does not stay in position, apply some oil on the joints and flexible arm that can help to improve flexibility as well as structural stability.
Solve low brightness by review the wattage of bulbs and replace or increase it to have better light quality.
In summary, examination lamps are vital instruments in the healthcare environment and it is important that they be used properly and maintained appropriately to ensure many years of reliable performance. Daily, remember, you will maintain the cleanliness and disinfection of your lamps, perform periodic review maintenance for optimizing illumination levels in medical proceduresining our table. By taking good care of them, your examination lamps will perform effectively and reliably for many years.
No comments yet